Rockethunter391

• How To Rip Ps3 Games To Pc
• Rip Ps3 Games To Pc
• Rip Ps3 Games To Hard Drive

Now come back to the point how to install PS3 games on 4.84 via USB. When we talk about PS3 games installation. Then there is various choice of game format such as PKG, disk format etc. If you have disk format PS3 game and you have HAN jailbroken console. First, you must convert PS3 Disk Game to PKG format. This is a short tutorial on how to set up the PS3 disc dumper to rip your PlayStation 3 game discs to your PC with one click. This method will let you play y. There's a better way to do this! Check that out here:and subscribe to see more content like this! For more info and to downl. Sure, Following the guide on the RPCS3 website you can dump games on a PC using a comparable drive. Failing that a CFW PS3 with multiMAN will RIP your disks. A compatable Blu-ray drive must have a comparable '.ird' file available in order to fully read PS3 discs.

From Redump Wiki

But no, there's no way to just stick the discs in a PC's blu-ray drive and have some program emulate a ps3 drive so you can rip the discs, at least not yet. If your ps3 can run linux (otheros) the firmware apparently still does enough work that you can read/copy the games that way too, but now that more or less requires a custom firmware in the.

Of the three methods listed below to dump PS3 discs, console dumping is the best to get started with because of the availability of required hardware + the ability to dump disc keys.

Note about dumping PS3 preproduction BD-R / DVD-R and PS3 kiosk discs: Dump these with the Disc Dumping Guide (MPF) method. Preproductions builds can be BD-R or DVD-R, and Kiosk demos can be CD-Rom, DVD-Rom, or BD-Rom. Some PS3 preproduction press builds that are NOT -R's (but standard PS3 Blu-Rays) will need to be dumped the same way as any retail PS3 game disc (example).

Dumping with a PS3 Console: MultiMAN Method

PS3 console dumping is the best setup to acquire because: A) the hardware is readily available at used shops and B) it allows you to dump disc keys.

Tools

• Install the latest CFW instructions here (use 3.56 CFW or higher).
• MultiMAN 04.20.00 or higher.
• Compatible PS3 Console model[1] (Early PS3 slims and original PS3 fats are compatible, newer PS3 slims and PS3 Super Slims are incompatible):
  • FAT:
    • CECH A01 NAND
    • CECH B NAND
    • CECH C NAND
    • CECH E NAND
    • CECH G NAND
    • CECH H NOR
    • CECH J NOR
    • CECH K NOR
    • CECH L NOR
    • CECH M NOR
    • CECH P NOR
    • CECH Q NOR
  • Slim:
    • CECH-20XX
    • CECH-21XX
    • CECH-25XX

Dumping ISO using MultiMAN

NOTE: If the PS3 is running a cobra CFW and up-to-date multiMAN, you have to select from the XMMB menu mmCM > 'Switch to multiMAN mode' to make the the option 'Enable Direct Disc Access' appear in the start menu. Otherwise, the ISO that you create will be incorrect (decrypted).

• In XMMB display mode, go to multiMAN > File Manager / mmOS.
• In the Start Menu icon (look at the MultiMAN icon in the left botton of the screen and click it), select 'Enable Direct Disc Access'.
  • If this option doesn't show up, go back to the XMMB display mode, and go to multiMAN > Switch to multiMan Mode.
  • You will have to select 'Enable Direct Disc Access' for each dump. The system will not remember this option.
• Double-click the Games icon to switch back to XMMB display mode. In the multiMAN column, select 'Refresh'.
• Now go to the Video column. It should now show a BD/DVD entry. Go to it, and select the 'Create ISO' option.
• You can now copy the ISO to your preferred destination. For the best speeds, select the internal HDD.
• Once it is dumped, you can use File Manager to copy/paste the ISO from the PS3ISO folder to your USB drive.
• If your destination is FAT, >4GB ISO's that are split into segments have to be joined using PS3 ISO Tools[2][3] or by using the 'copy /b' command on CMD.

Dumping metadata using Getkey

• Download latest version of Rebug Toolbox (update if you have an older version). Official site currently down [4], possibly use this one?[5]
• Once you install the Toolbox PKG, you should be able to see the app installed on the XMB. Launch it. Once you are inside, move to the right over the options till the 'Utilities' icon options displays. Then go down till you spot the following options:

1. 'Dump eid root key (dump eid root key at dev_hdd0/game/RBGTLBOX2/USRDIR/eid_root_key)'. Once you push it, the console will create a file called 'eid_root_key' on the mentioned route. NOTE: the eid_root_key is console specific so can be reused.

Next, get a copy of the eid_root_key file:

• • Transfer to your computer via FTP: You can FTP into your console to copy the eid_root_key to your computer.
  • Transfer to your thumb drive via Console: Use MultiMAN File Manager or any tool to move inside the PS3 file system to get inside the RBGTLBOX2 folder. Make sure you have a USB drive connected to the PS3. Copy the Eid Root Key and paste it to the USB drive route (should be something like /dev_usb000).

2. 'Export Flash to File (Backup your current NOR/NAND flash to /dev_usb000)'. As soon as you enter the option, the system will ask you to 'Please insert a USB drive (/dev_usb000) with at least 256mb free and try again!'. Make sure you have a USB drive (if posible, on Fat32 format) connected to the correct usb port (the right-most usb port). Try till you hit the correct port and the dumping process will start. NOTE: the NOR/NAND flash backup is console specific so can be reused.

• If everything was done correctly, once you pop the USB into a computer you should have two files: 'eid_root_key' and something like this '20181219-130200-FLASH-NOR-FW.81' (The FW numbers depends on your firmware, in my case, i did it with FW 4.81).
• Fire up an Hex Editor app. We will use 'HxD' for example [6].
• Once HxD is launched, go to 'Open' and search for your NOR/NAND dump file. Open it.
• Once is loaded, hit CTRL+G and type in '303A0' if you're on NOR or '81BA0' if on NAND. (Note: If you didnt understand this, just write and search '303A0', when you start hex-editing the file, you are on NOR)
• At the left column, you should see the Offsets are displayed and the one we were looking, 0x00303A0 (for NOR in this case), will be there. Copy the 0x30 bytes from that offset and paste them into a new file AKA mark the 0x00303A0, 0x00303B0 and 0x00303C0 lines from '00' to '0F' values and copy them (CTRL+C). Go to File > New and a clean sheet will open. Paste (CTRL+V) the content and keep it opened.

This would be a visual example of what are you looking for. Mind you only need to search and copy the NOR bytes or the NAND bytes, not both:

• Now, go to 'File' > 'Open' and search the EID root key file. Once is opened, do CTRL+A to select all the content and copy it (CTRL+C). Go to the previous sheet we created (the one where we pasted NOR/NAND bytes) and just paste (CTRL+V), making the bytes from the eid root key appear under the NOR/NAND ones. Go to 'File' > 'Save' and rename this file as '3Dump.bin'
• Take your '3Dump.bin' file and place it the USB drive.
• Plug your USB drive into the right-most USB port (/dev_usb000/).
• Launch GetKey from XMB (with the game disc inserted): it'll run and exit back to XMB.
• It creates two files on the root of the USB drive: disc.pic & getkey.log
• The getkey.log file will contain the disc_key, disc_id and PIC. If anything went wrong creating the 3Dump.bin or extracting the data, the 'getkey.log' will contain a WARNING message saying the process failed.
• Make sure that you provide the complete and correct metadata for each dump.

Dumping with a PC and an external PS3/OEM Blu-Ray drive

Dumping with a Windows PC, a compatible PS3 OEM drive, and a 3k3y device can be tricky - specifically finding all the necessary hardware. For anyone getting into PS3 dumping, it's better to use a console. 3K3Y setup video here[7]

Tools

Hardware

• 3k3y Ripper Device (no longer being manufactured / sold)
• Sony PS3 Blu-Ray drive with sector 2 zeroing[8]
• Sony PS3 OEM Power Cable[9] (these sometimes come with PS3 OEM drives, but not always)
• Power adapter. Search 'UGREEN USB to IDE Converter, USB 3.0 to IDE' on Amazon - even though you don't need to convert IDE to anything, it's still a great power adapter for feeding power to your Blu-Ray drive.

Software

First Time Setup

• Hardware: Your Blu-Ray drive should come with a ribbon, attach this to the 3k3y Ripper. The 3k3y Ripper should come with a USB cable, plug this in to the 3k3y Ripper and the other end into your computer. Feed your Blu-Ray drive power with the UGREEN power adapter AND plug the adapter's USB cable to the computer for additional power. Your computer should detect the drive.
• Software: Install IsoTools app linked above. Unzip GetKeyFrom3k3y and DVDToImg, these two are command line apps.
• Power on your drive and hook up the USB to your computer.
• Make sure your Blu-Ray drive is empty, you can eject any discs with the tiny black button on top of the 3k3y Ripper.
• Open IsoTools. You should get a warning telling you that if you press 'Yes' you will no longer be able to use the drive with a PS3 console ('You've enabled the use of default keys...'). Chose 'Yes'. [NOTE: if you don't get this pop-up, go to Tools > Settings and uncheck and recheck 'Use Default Keys', at this point you should get the pop-up.]

Dumping

• Open IsoTools app.
• Put your PS3 disc into the drive. IsoTools should recognize the disc and say something like 'PS3 Game Disc: BLUS-12345, Ready'. (Note 1: When you insert your PS3 disc, don't be surprised if Windows doesn't recognize it under 'My Computer'. Note 2: You might have to eject and reinsert the disc before IsoTools will recognize it.)
• Close IsoTools app.
• Now open up the command line and cd (change directory) to the location of the dvdtoimg.exe that you downloaded earlier, and run a command: dvdtoimg f gamename.iso (where 'f' is the drive letter). Eventually, percentage will reach '100%' and then 'Process finished'.
• Eject the disc.
• Reopen IsoTools app, insert the disc again, and choose 'Rip'. Now IsoTools will ask you where you want to save the files (an .ird and a .dec.iso). Once you click Save, IsoTools will start dumping. You can immediately 'Cancel' the dump and close IsoTools.
• Move the gamename.dec.iso file to the location of GetKeyFrom3k3y.exe
• Now in the command line, cd (change directory) to the location of GetKeyFrom3k3y.exe, and run a comand: GetKeyFrom3k3y 'gamename.dec.iso' >info.txt
• Now you can delete the .ird and gamename.dec.iso files.

Dumping with a PC and a Non-PS3/OEM Blu-Ray Drive

PS3 discs via this method cannot have their IRD/Keys extracted, but are still datted in redump. Sometimes disc keys can be tracked down on the internet depending on the rarity of the title.

If you choose to dump with this method, use a compatible disc drive and this dumping guide.

Submit your Dump

Please review the important guidelines outlined in this forum thread regarding submission of both new discs and verifications: Redump Submissions

The required information for a submission is:

• Title of the game
• Category (usually 'Game').
• Media type: either BD-25 or BD-50
• Serial on the disc and, if it's different, serial on the cover (spine)
• Version of the game. This can be found by mounting the iso file and opening the PARAM.SFO file in the PS3_Game folder in a hex editor (for example http://www.hexed.it). Look for the VERSION and not the APP_VER.
• Ringcode information (see below for more information)
• Checksums for gamename.iso
• Contents of info.txt if dumped with PC method or getkey.log if dumped on console
• Barcode(s)
• PVD

Furthermore, it's optional (but highly appreciated) to check which languages the game has. Some games either show a language selection screen at startup or in the game options. Many games will boot with different languages depending on the active language selected in the System Settings. Booting the game with each system language is necessary to identify the supported languages for these games.

Ring Information

The ring information can be found on the 'bottom' of the disc at printed/moulded on or near the inner plastic part of the disc.

Mastering code

For European discs, this is usually in the following format:

American discs have a code in the format:

How To Rip Ps3 Games To Pc

Asian discs have a code in the format:

Rip Ps3 Games To Pc

Don't forget the tab!

Mastering SID

Mastering SID is printed on the disc (don't confuse it with the Mould SID which is pressed/moulded into the plastic). It is always in the format:

Toolstamp

The toolstamp is a very small piece of text usually at the end of the Mastering Code. It's a few characters long. Note that the text is often mirrored, so make sure you don't copy the code backwards.

Mould SID

The Mould SID not printed on the back of the disc, but moulded/pressed in the plastic at the absolute center of the disc. The Mould SID is really small and can be read from the front/labelside (instead of the back) of the disc. It's always in the format:

Rip Ps3 Games To Hard Drive

Retrieving PVD

Depending on the media and/or your version of IsoBuster (free version usually), you may not be able to view sectors and obtain the PVD with IsoBuster. The PVD is not absolutely required for your submission. Alternatively, you can locate it using a Hex Editor / Hex Viewer program such as Hex Workshop or HxD.

• IsoBuster option
  • Open IsoBuster app.
  • File > Open Image File. Select the .iso you created to open it.
  • In the left hand side of the app, right click on 'Session 1' > Sector View.
  • In the box at the top input '16'.
  • Scoll down and highlight lines 0320 - 0370 > click on the notepad-looking icon (when your mouse hovers over it, it says 'Copy').
  • Paste this info into your submission, it's the 'PVD' info. Here's an example of how it should look:

• Hex Editor option
  • Open up the .iso file with your hex editor of choice.
  • Locate the sections 00008320 through 00008370 and copy this information.
  • Past the info into your submission file.

Template

You can copy/paste the below template to submit a dump on the forum: